Hire top bricklayers near Murrumba Downs

Find 19 bricklayers within 15 km of Murrumba Downs 4503. Compare ratings, reviews, and credentials from local professionals.

Write your job once

We'll contact local bricklayers for you.

Instant price estimate

See a scoped range for your job before you talk to anyone.

Compare multiple quotes

Up to 3 local bricklayers quote your job, with no obligation.

19+local providers

Get an instant price estimate

What's your job?

Find another job

Roughly how much brickwork needs repointing?

Estimated range

$1,501 – $4,201

$450$15,454

Guide pricing only. Final quotes vary by scope, access, materials, and site conditions.

Free estimate · Quotes from up to 3 tradies

4.61

Average rating of bricklayers within 15 km of Murrumba Downs · 372 public reviews

Ranked by distance, ratings and profile completeness.

Browse 19 bricklayers

within 15km · Page 1 of 2

We can help you find the right bricklayer

Describe your job once, we’ll tell you what we think it should cost and then put you in contact with bricklayers until you find the right quote.

  1. 1

    Tell us about your job

    Describe the job once, we'll remember it so you don't have to say it again.

  2. 2

    Get a price estimate

    Know roughly what your job should cost before you speak to a tradie.

  3. 3

    Choose the best bricklayer

    Compare prices and available credentials side by side, with no obligation to proceed.

What to expect when hiring bricklayers in Murrumba Downs

Where bricklayers near Murrumba Downs are based, how to choose one, what the job should cost, what a good quote includes and which licence to check.

Where bricklayers near Murrumba Downs are based

Of the 19 bricklayers listed, none are based in Murrumba Downs, but 9 are within 15 km, the most in Brendale, Cashmere and Clontarf. The other 10 are based more than 15 km away.

based in Murrumba Downs
0
based within 15 km
9
based further away
10

Bricklayers based in each suburb

  • None listed yet
  • Water

The map shows approximately where businesses are based, but tradies will often travel for work. Darker shading means higher availability in an area.

Show suburbs as a list

More bricklayers based here

None listed yet

Around Murrumba Downs: where bricklayers are basedMap of the suburbs within about 15 km of Murrumba Downs where bricklayers are based, from ABS 2021 boundaries, with water shown. Suburbs are shaded from light to dark teal by how many bricklayers are based there; Murrumba Downs is outlined. A list of suburbs grouped by band follows the map.
Suburb boundaries: ABS ASGS Edition 3 (2021), CC BY 4.0

How to choose a good bricklayer in Murrumba Downs

Murrumba Downs has plenty of well-reviewed bricklayers to choose from. Use these numbers as a reference point when you compare profiles and quotes.

Most bricklayers here are rated highly, so it helps to check how many reviews sit behind a rating. The typical bricklayer has 6 reviews. Of the 15 rated bricklayers within 15 km of Murrumba Downs, 3 have 4.8 stars or more from at least 10 reviews.

SureQuote rankings take both star rating and review count into consideration to ensure you're seeing the best of the bunch. Updated October 2026.

average rating
4.61
typical reviews
6
what the best have
4.8★ · 10+

Star rating

60% of bricklayers here have a perfect 5.0

Best: 4.8+

Number of reviews

Half have 6 or fewer reviews

Best: 10+ reviews

How does that compare to other suburbs?

SuburbAverage star rating
Kallangur11 rated bricklayers6 typical reviews
4.68
Lawnton16 rated bricklayers5 typical reviews
4.63
Murrumba Downs15 rated bricklayers6 typical reviews
4.61
Dohles Rocks15 rated bricklayers6 typical reviews
4.61
Griffin15 rated bricklayers6 typical reviews
4.61
Mango Hill9 rated bricklayers6 typical reviews
4.61

What bricklaying costs

Across Australia, bricklaying typically runs $1,501 – $4,201 for repoint brickwork, and $380 – $1,441 for brickwork patch repair.

Local prices vary, so these are typical Australia-wide ranges, not a quote for Murrumba Downs. What you'll pay comes down to the size of the job, the condition of what's being worked on, and the finish you choose. Get a few quotes to see your exact number. It's free.

Things to consider before you book

The local conditions that shape the job, the best time of year to book, and what to sort out before you choose a bricklayer.

Elevated Wind Area
Coastal Corrosion
Warm Humid Zone
Above-Average Rainfall
Very High Termite Risk
  • Wind Exposure

    Murrumba Downs is in an elevated wind area — bricklaying work should use fixings rated for higher wind loads. Make sure your quote specifies wind-appropriate materials.

  • Coastal-Grade Fixings

    Murrumba Downs is close enough to the coast that unprotected metal degrades faster than inland. Coastal-grade fixings with a quality protective coating are standard practice for external work here.

  • Moisture Management and Drier-Month Scheduling

    Murrumba Downs's warm, humid climate means moisture management matters for any exterior work. Good ventilation and moisture barriers prevent issues behind surfaces.

  • Schedule Outdoor Work for Drier Months

    Murrumba Downs gets more rain than most areas — bricklaying work benefits from scheduling in the drier months. Your tradie will work around the forecast, but booking ahead gives the best run of clear days.

  • High Termite Activity

    Murrumba Downs has very high termite activity — annual inspections are essential, and any work involving timber or ground contact should factor in termite management.

Best time of year for bricklaying in Murrumba Downs

Ideal months: April to June and September to November.

IdealWorkableLess suitable

Based on typical local rainfall, temperature and humidity.

What's in a good Bricklaying quote?

A good quote spells out how the job is priced and what's covered (labour, materials, prep and clean-up), so you're comparing like for like. Check what each bricklayer's quote covers before you choose.

Worth knowing: getting two or three quotes is the simplest way to land a fair price, and it costs you nothing.

  • 01
    Brick specs

    Exact brand, type and colour so you compare like with like.

  • 02
    Footings and piers

    Depth, width, concrete grade and pier spacing, all named.

  • 03
    Mortar mix

    Lime or cement and the ratio, important for older homes.

  • 04
    Brickwork scope

    Wall type, dimensions, height and bond pattern.

  • 05
    Scaffolding and clean-up

    Whether scaffold, skip and waste removal are included.

  • 06
    Licence and ABN

    Both on the quote so you can verify them.

Cheapest isn't always the best. Check these before you hire anybody.

  • Recent, genuine reviews

    Read the latest ones, not just the count

  • Experience near you

    Jobs like yours, done locally

  • Credentials for the job

    Licence, insurance and business details

  • A clear written quote

    Itemised, so you can compare like-for-like

Do bricklayers need a licence in QLD?

Bricklayers need a licence in QLD for jobs over $3,300.

Bricklaying and blocklaying have their own licence class. Smaller jobs inside a bigger licensed contract still need a licence.

Licence
Contractor licence (Bricklaying and blocklaying)
Regulator
Queensland Building and Construction Commission

Sources: qbcc.qld.gov.au, Queensland Building and Construction Commission Regulation 2018. Checked 16 Oct 2026.

Frequently asked questions

Hiring bricklayers

Does wind exposure matter for bricklaying work in Murrumba Downs?
Yes — Murrumba Downs is in an elevated wind area, so external fixings and installations should be rated for higher wind loads. This is standard practice for the area — make sure your quote reflects it.
Does coastal corrosion affect metalwork in Murrumba Downs?
Yes — at Murrumba Downs's distance from the ocean, salt air attacks unprotected metal over time. Coastal-rated fixings and a protective coating are the standard approach. It's a modest cost difference that significantly extends lifespan.
Does humidity affect bricklaying work in Murrumba Downs?
Murrumba Downs's warm, humid conditions mean water-based finishes need extra drying time and moisture barriers are important behind any exterior surface. Scheduling exterior work for the drier months gives the best result.
Does rain affect scheduling bricklaying work in Murrumba Downs?
Murrumba Downs gets more rainfall than the Australian average, so bricklaying work benefits from targeting the drier months. Your tradie will work around the weather, but planning ahead means fewer delays.
Is termite risk a concern for bricklaying work in Murrumba Downs?
Murrumba Downs has very high termite activity. If your job involves timber or ground contact, termite treatment should be part of the scope. Annual professional inspections are recommended for all properties here.

Request quotes from bricklayers in Murrumba Downs

Describe your job once and compare quotes from bricklayers in Murrumba Downs.

  • Verified Tradies
  • Personalised Price Estimate
  • Compare Quotes
  • Free For Homeowners