Hire top-rated heat pump installers in TAS

Get an instant estimate and up to 3 quotes from heat pump installers in Tasmania.

Write your job once

We'll contact local heat pump installers for you.

Instant price estimate

See a scoped range for your job before you talk to anyone.

Compare multiple quotes

Up to 3 local heat pump installers quote your job, with no obligation.

Get an instant price estimate

What's your job?

Find another job

How many heat pump hot water units need installing or replacing?

Estimated range

$3,542 – $7,576

$2,981$35,824

Guide pricing only. Final quotes vary by scope, access, materials, and site conditions.

Free estimate · Quotes from up to 3 tradies

Or find one yourself

Search a suburb, a postcode or a business you know.

We can help you find the right heat pump installer

Describe your job once, we’ll tell you what we think it should cost and then put you in contact with heat pump installers until you find the right quote.

  1. 1

    Tell us about your job

    Describe the job once, we'll remember it so you don't have to say it again.

  2. 2

    Get a price estimate

    Know roughly what your job should cost before you speak to a tradie.

  3. 3

    Choose the best heat pump installer

    Compare prices and available credentials side by side, with no obligation to proceed.

What to expect when hiring heat pump installers in Tasmania

What the job should cost, what a good quote includes and which licence to check.

What heat pump costs

Across Australia, heat pump typically runs $3,542 – $7,576 for hot water system installation, and $382 – $1,507 for heat pump hot water repair.

Local prices vary, so these are typical Australia-wide ranges, not a quote for Tasmania. What you'll pay comes down to the size of the job, the condition of what's being worked on, and the finish you choose. Get a few quotes to see your exact number. It's free.

Things to consider before you book

The local conditions that shape the job, the best time of year to book, and what to sort out before you choose a heat pump installer.

Bushfire Prone Land
Cool Climate Zone
  • Keep Gutters Clear and Check Council Rules

    Most of Tasmania is classified as bushfire prone land — keeping gutters and roof valleys clear is especially important here. If your property is near bushland, check with council whether any specific requirements apply.

  • Heating and Insulation Are the Priority

    Most of Tasmania is in a cool climate zone — heating is the priority for any climate control work, and good insulation makes a bigger difference here than in milder areas.

  • Seasonal Rainfall

    Most of Tasmania gets moderate rainfall, so timing matters for heat pump work. Targeting the drier months gives the best run of uninterrupted days.

What's in a good Heat Pump quote?

A good quote spells out how the job is priced and what's covered (labour, materials, prep and clean-up), so you're comparing like for like. Check what each heat pump installer's quote covers before you choose.

Worth knowing: getting two or three quotes is the simplest way to land a fair price, and it costs you nothing.

  • 01
    Model and specs

    Exact brand, model, tank size and COP rating.

  • 02
    Rebates itemised

    Before-rebate price, each rebate, and your final cost.

  • 03
    Full scope

    Old system removal, tempering valve, electrical and switchboard.

  • 04
    Sizing rationale

    Why the tank size matches your household and usage.

  • 05
    Warranty split

    Separate years for tank, compressor and workmanship.

  • 06
    Licences

    Licensed plumber and electrician, with compliance certificates.

Cheapest isn't always the best. Check these before you hire anybody.

  • Recent, genuine reviews

    Read the latest ones, not just the count

  • Experience near you

    Jobs like yours, done locally

  • Credentials for the job

    Licence, insurance and business details

  • A clear written quote

    Itemised, so you can compare like-for-like

Hiring a heat pump installer in TAS

What the law requires before and after you sign.

Heat pump installers need a licence in TAS for any job.

Installing or servicing a heat pump needs a plumber with a mechanical services licence. The business needs a plumbing contractor licence.

Licence
Plumbing contractor licence
Categories
Mechanical Services Plumbing, Mechanical Services Plumbing - Restricted to Refrigerated Air-conditioning, Mechanical Services Plumbing - Restricted to Split Systems up to and including 18 kWR
Regulator
Consumer Affairs Tasmania
Check a licence on the Consumer Affairs Tasmania register
Written contractfrom$20,000

The contract must be in writing, dated and signed by both of you before work starts.

Applies to heat pump jobs.

Deposit cap

The cap covers contracts of $20,000 or more. It is 10% below $50,000 and 5% from $50,000. It is 20% when most work is off-site.

Applies only to contracts of $20,000 or more. The cap is 10% below $50,000 and 5% at $50,000 or more.

Cooling-off period5 business dayson contracts over $20,000

The days start once you have the signed contract and the consumer guide. Without the guide, you have 7 days from finding out.

Applies to heat pump jobs.

Home warranty insurance

Doesn't apply to this work.

Sources: Occupational Licensing Act 2005, consumeraffairs.tas.gov.au, buildingstandards.tas.gov.au, Residential Building Work Contracts and Dispute Resolution Act 2016. Checked 16 Oct 2026.

Frequently asked questions

Hiring heat pump installers

How much do heat pump installers typically charge?
Costs vary significantly depending on the job — a routine service, a diagnostic repair or a like‑for‑like replacement involve different labour and parts requirements. Unit size, access, and whether after‑hours attendance is needed also affect total cost. The live pricing shown on this page provides current local rates to help you compare quotes.
Do heat pump installers charge call-out fees?
Most heat pump installers charge a call‑out fee to attend your property, which covers travel and an initial assessment. This is usually separate from hourly labour and parts costs, and after‑hours work commonly attracts higher rates (often around 1.5–2× standard rates).
Do heat pump installers need a licence in Australia?
Yes — licences are required in all Australian states and territories for this work. In NSW the key authority is NSW Fair Trading. Look for a valid state refrigeration/air conditioning contractor licence and authorised refrigerant‑handling credentials (for example an ARC Tick RHL); installers working with solar/battery integrations may also hold Clean Energy Council accreditation.
Do I need a licensed Heat Pump Installer in Tasmania?
In Tasmania, this kind of work generally must be carried out by an appropriately licensed professional. When you compare heat pump installers in Tasmania on SureQuote, you can check the credentials each business has provided before you choose.

Using SureQuote

Is the SureQuote estimate a quote, and why can a tradie's quote be different?
No. Your estimate is a guide price for a typical job that matches your answers. A tradie prices your actual job in their quote, once they've seen things like access, condition, materials and the full scope. Read the full answer
What happens after I submit my job, and how many tradies will contact me?
We email you your estimate and a link to your job. Up to 3 local tradies can take it and contact you to quote; only they get your name, phone and email, and you choose who to hire, if anyone. Read the full answer
Is it free to get quotes, and does the tradie's fee raise my price?
Yes, getting quotes is free and you don't have to hire anyone. Tradies pay us a capped fee to take your job, and we set it before they quote, so nothing is added to your quote. Read the full answer
Can I add photos to my job?
Yes. Add up to 10 photos in the chat after you give your contact details, or later from the job in Hire, and tradies see them before they take the job. Read the full answer
Do I have to hire one of the tradies?
No. Getting quotes is free, you're never obliged to hire anyone, and you pay only the tradie you choose to hire. Read the full answer
Does SureQuote check tradies' licences and insurance?
We collect each business's ABN, licence, insurance and warranty details and keep them as up to date as we can, so you can see them in one place on its profile. We don't guarantee them, so always check the licence yourself on the relevant licence register before you hire. Read the full answer

Questions about heat pump in TAS

Do heat pump installers need a licence in TAS?

Heat pump installers need a licence in TAS for any job.

Installing or servicing a heat pump needs a plumber with a mechanical services licence. The business needs a plumbing contractor licence.

The licence is the Plumbing contractor licence.

How do I check a heat pump installer's licence in TAS?

Ask the heat pump installer for their licence number, then look them up on the Consumer Affairs Tasmania public register.

Check a licence
Who regulates heat pump installers in TAS?

Heat pump installers are regulated by Consumer Affairs Tasmania.

Are there exceptions to the licence rule for heat pump installers in TAS?

You cannot install a heat pump yourself. It needs a licensed plumber.

Do I need a written contract with a heat pump installer in TAS?

Heat pump jobs from $20,000 need a written contract.

The contract must be in writing, dated and signed by both of you before work starts.

How much deposit can a heat pump installer ask for in TAS?

The cap covers contracts of $20,000 or more. It is 10% below $50,000 and 5% from $50,000. It is 20% when most work is off-site.

Applies only to contracts of $20,000 or more. The cap is 10% below $50,000 and 5% at $50,000 or more.

Does a heat pump installer have to give me home warranty insurance in TAS?

Doesn't apply to this work.

Is there a cooling-off period for a contract with a heat pump installer in TAS?

You have 5 business days to cool off on contracts over $20,000.

The days start once you have the signed contract and the consumer guide. Without the guide, you have 7 days from finding out.

Sources: Occupational Licensing Act 2005, consumeraffairs.tas.gov.au, buildingstandards.tas.gov.au, Residential Building Work Contracts and Dispute Resolution Act 2016. Checked 16 Oct 2026.

Request quotes from heat pump installers in Tasmania

Describe your job once and compare quotes from heat pump installers across Tasmania.

Get free quotes
  • Verified Tradies
  • Personalised Price Estimate
  • Compare Quotes
  • Free For Homeowners