Electrician Job Guide

Find a Electrician for Install powerpoints or switches

Installing or replacing powerpoints and switches can be a simple like-for-like swap or may involve new wiring or masonry work, which affects time and materials.

Scope-matched providers

Matched providers are filtered for this job type.

Fast estimate flow

Get a scoped range before you post your job.

Compliance documentation

Quote responses can include required compliance notes.

20,242 local providers4.8 avg ratingTypical duration: 2-11 hours

What we'll ask you

4 quick questions for your estimate

Answer these and we’ll generate a personalised range in seconds before you post your job.

Pricing guide

Cost depends mainly on whether the job is a like-for-like replacement, a new installation needing cable runs or a dedicated circuit, or an install into masonry which usually takes longer. Materials allowances typically cover standard outlets and faceplates, while premium hardware, long cable runs or conduit increase material needs. Callout fees and after-hours attendance (usually 1.5–2.0x) also affect the final cost.

  • Scope: replacement vs new circuit

    Like-for-like replacements are generally quicker, while new installations needing cable runs or a dedicated circuit require more labour and materials.

  • Wall material and access

    Brick, concrete or tiled walls typically need heavier-duty drilling and fixing, increasing installation time compared with plasterboard.

  • Switchboard or circuit capacity

    If the existing circuit cannot supply the new point, additional switchboard work or a dedicated circuit may be needed and is usually quoted separately.

  • Materials and hardware choices

    Standard outlets and faceplates are covered by typical allowances, but premium fittings, specialist devices or long cable runs increase materials and complexity.

  • Timing, callout and after-hours

    A callout fee normally applies and after-hours attendance is usually charged at higher rates (commonly around 1.5–2.0x), increasing the total cost.

Install powerpoints or switches

Estimated range

Request quote

Answer the estimate questions to refine the scope.

What moves this estimate

  • Scope: replacement vs new circuit: Like-for-like replacements are generally quicker, while new installations needing cable runs or a dedicated circuit require more labour and materials.
  • Wall material and access: Brick, concrete or tiled walls typically need heavier-duty drilling and fixing, increasing installation time compared with plasterboard.
  • Switchboard or circuit capacity: If the existing circuit cannot supply the new point, additional switchboard work or a dedicated circuit may be needed and is usually quoted separately.
  • Materials and hardware choices: Standard outlets and faceplates are covered by typical allowances, but premium fittings, specialist devices or long cable runs increase materials and complexity.

Local results

Active providers

20,242

Average rating

4.8

  • Had CabledIN out to install a wired Reolink doorbell and replace an exterior wall light. They were on time, professional, and explained everything clearly. The install was clean a…

    Afnan Mazumder

  • The two Electricians did a wonderful job on installing my Air conditioner and had done a very professional installment and were efficient with this task which was a big job which…

    Anthony “TONY” Palmer

  • Fast and reliable service. They arrived on time and installed a new exhaust fan. Even left the space clean. 100% would recommend

    Daniel Fillery

How it works

  1. 1

    Describe your job

    We ask targeted questions to scope your exact job.

  2. 2

    Get matched

    We match you with local providers for this job type.

  3. 3

    Compare and book

    Review quotes and choose the provider that fits.

Frequently asked questions

How long will a powerpoint installation take?
A simple like-for-like swap is typically much quicker than a new installation. New cable runs, limited access or masonry walls usually increase the time required.
Will my switchboard need upgrading?
If the new point requires a dedicated circuit or the existing circuit capacity is insufficient, additional switchboard work may be required. That work is often quoted separately after an inspection.
Can powerpoints be added to tiled or brick walls?
Yes, but installations into masonry usually involve more drilling and heavier fixings, which typically take longer. Extensive chasing or full making-good of tiles or walls may be out-of-scope and could need a separate quote.
How accurate is the instant estimate?
Our estimates are built from research across thousands of local jobs and real pricing data. Use them as a guide when speaking to electricians — your actual quote will depend on your specific job.
How many quotes will I get?
We'll match you with up to 3 electricians initially. If you'd like more options, you can request additional matches.
Do I pay anything to get quotes?
No — the service is 100% free for homeowners.
Why do you need photos?
Clear photos cut surprises and price blowouts, saving you money.

Ready to compare quotes?

Start with an instant estimate and then compare local providers for this exact job.

Trusted Tradies
Transparent Quotes
Fast Response Guarantee
100% Australian-Owned