Hire top bricklayers near Machans Beach

Find 9 bricklayers within 30 km of Machans Beach 4878. Compare ratings, reviews, and credentials from local professionals.

Write your job once

We'll contact local bricklayers for you.

Instant price estimate

See a scoped range for your job before you talk to anyone.

Compare multiple quotes

Up to 3 local bricklayers quote your job — no obligation.

9+local providers

Get an instant price estimate

What's your job?

Find another job

Roughly how much brickwork needs repointing?

Estimated range

$1,501 – $4,201

$450$15,454

Guide pricing only. Final quotes vary by scope, access, materials, and site conditions.

Free estimate · Quotes from 3+ tradies

4.10

Average rating of bricklayers within 30 km of Machans Beach · 31 public reviews

Ranked by distance, ratings and profile completeness.

We can help you find the right bricklayer

Describe your job once, we’ll tell you what we think it should cost and then put you in contact with bricklayers until you find the right quote.

  1. 1

    Tell us about your job

    Describe the job once, we'll remember it so you don't have to say it again.

  2. 2

    Get a price estimate

    Know roughly what your job should cost before you speak to a tradie.

  3. 3

    Choose the best bricklayer

    Compare prices and available credentials side by side, with no obligation to proceed.

What to expect when hiring bricklayers in Machans Beach

Where bricklayers near Machans Beach are based, how to choose one, what the job should cost, what a good quote includes and which licence to check.

Where bricklayers near Machans Beach are based

Of the 9 bricklayers listed, none are based in Machans Beach, but 6 are within 30 km, the most in Clifton Beach, Earlville and Edmonton. The other 3 are based more than 30 km away.

based in Machans Beach
0
based within 30 km
6
based further away
3

Bricklayers based in each suburb

  • None listed yet
  • Water

The map shows approximately where businesses are based, but tradies will often travel for work. Darker shading means higher availability in an area.

Show suburbs as a list

None listed yet

Around Machans Beach: where bricklayers are basedMap of the suburbs within about 30 km of Machans Beach where bricklayers are based, from ABS 2021 boundaries, with water shown. Suburbs are shaded from light to dark teal by how many bricklayers are based there; Machans Beach is outlined. A list of suburbs grouped by band follows the map.
Suburb boundaries: ABS ASGS Edition 3 (2021), CC BY 4.0

How to choose a good bricklayer in Machans Beach

There are 5 rated bricklayers within 30 km of Machans Beach. Use these numbers as a reference point when you compare profiles and quotes.

Their average rating is 4.10 and the typical bricklayer has 6 reviews. None have 4.8 stars or more from at least 10 reviews.

There aren't many bricklayers within 30 km of Machans Beach, so some may travel in from other parts of Cairns - North. Ask about travel costs when you compare quotes.

SureQuote rankings take both star rating and review count into consideration to ensure you're seeing the best of the bunch. Updated October 2026.

average rating
4.10
typical reviews
6
what the best have
4.8★ · 10+

How does that compare to other suburbs?

SuburbAverage star rating
Machans Beach5 rated bricklayers6 typical reviews
4.10
Holloways Beach5 rated bricklayers6 typical reviews
4.10
Aeroglen5 rated bricklayers6 typical reviews
4.10
Stratford5 rated bricklayers6 typical reviews
4.10
Whitfield5 rated bricklayers6 typical reviews
4.10
Barron5 rated bricklayers6 typical reviews
4.10

What bricklaying costs

Across Australia, bricklaying typically runs $1,501 – $4,201 for repoint brickwork, and $380 – $1,441 for brickwork patch repair.

Local prices vary, so these are typical Australia-wide ranges, not a quote for Machans Beach. What you'll pay comes down to the size of the job, the condition of what's being worked on, and the finish you choose. Get a few quotes to see your exact number — it's free.

Things to consider before you book

The local conditions that shape the job, the best time of year to book, and what to sort out before you choose a bricklayer.

Bushfire Prone Land
Cyclone Zone
CX Corrosion Zone
Tropical Climate Zone
High Rainfall Area
  • Keep Gutters Clear and Check Council Rules

    Machans Beach is classified as bushfire prone land — keeping gutters and roof valleys clear is especially important here. If your property is near bushland, check with council whether any specific requirements apply.

  • Cyclone-Rated Materials Required

    Machans Beach is in a cyclone zone — all external installations need cyclone-rated fixings and mounting. Standard fixings aren't adequate for the wind loads here.

  • Marine-Grade Fixings Required

    Machans Beach sits in the most severe corrosion zone — right on the coast. All external fixings must be marine-grade stainless steel, and structural steel needs hot-dip galvanising as a minimum. Standard products fail rapidly here.

  • UV-Stable and Mould-Resistant Products Essential

    Machans Beach's tropical climate means intense UV, high humidity, and heavy seasonal rain. Mould-resistant, UV-stable products aren't optional for exterior work here.

  • Book Early — Weather Windows Fill Fast

    Machans Beach gets significantly more rainfall than most of Australia — bricklayer work needs to target the drier months. Book well ahead, because the good weather windows fill up fast.

Best time of year for bricklaying in Machans Beach

Ideal months: June to October.

IdealWorkableLess suitable

Based on typical local rainfall, temperature and humidity.

What's in a good Bricklaying quote?

A good quote spells out how the job is priced and what's covered — labour, materials, prep and clean-up — so you're comparing like for like. Check what each bricklayer's quote covers before you choose.

Worth knowing: getting two or three quotes is the simplest way to land a fair price — and it costs you nothing.

  • 01
    Brick specs

    Exact brand, type and colour so you compare like with like.

  • 02
    Footings and piers

    Depth, width, concrete grade and pier spacing, all named.

  • 03
    Mortar mix

    Lime or cement and the ratio, important for older homes.

  • 04
    Brickwork scope

    Wall type, dimensions, height and bond pattern.

  • 05
    Scaffolding and clean-up

    Whether scaffold, skip and waste removal are included.

  • 06
    Licence and ABN

    Both on the quote so you can verify them.

Cheapest isn't always the best. Check these before you hire anybody.

  • Recent, genuine reviews

    Read the latest ones, not just the count

  • Experience near you

    Jobs like yours, done locally

  • Credentials for the job

    Licence, insurance and business details

  • A clear written quote

    Itemised, so you can compare like-for-like

Do bricklayers need a licence in QLD?

Bricklayers need a licence in QLD for jobs over $3,300.

Bricklaying and blocklaying have their own licence class. Smaller jobs inside a bigger licensed contract still need a licence.

Licence
Contractor licence (Bricklaying and blocklaying)
Regulator
Queensland Building and Construction Commission

Sources: qbcc.qld.gov.au, Queensland Building and Construction Commission Regulation 2018. Checked 16 Oct 2026.

Frequently asked questions

Hiring bricklayers

Does bushfire classification affect work in Machans Beach?
Machans Beach is classified as bushfire prone land. For most properties this means regular maintenance — keeping gutters clear and managing vegetation near the house. Properties closer to bushland may have additional requirements. Check with your council if unsure.
Does cyclone risk affect bricklayer work in Machans Beach?
Yes — Machans Beach is in a cyclone-rated area. All external installations, from solar panels to fencing, need cyclone-rated fixings and mounting systems. Make sure your quote specifies cyclone-rated materials.
What material grade do I need for bricklayer work in Machans Beach?
Machans Beach is classified CX corrosion zone — the most severe rating. All external metalwork needs marine-grade stainless steel fixings and hot-dip galvanised structural steel at minimum. Standard galvanised products corrode too quickly this close to the ocean. Your quote should specify the material grade for all fixings and steelwork.
Does the tropical climate affect bricklayer work in Machans Beach?
Yes — Machans Beach's tropical conditions drive everything: UV-stable products for any exterior surface, mould resistance for coatings, and scheduling around the wet season. Discuss tropical-rated product options when getting quotes.
Can bricklayer work be done year-round in Machans Beach?
Machans Beach receives high rainfall, so bricklayer work is best scheduled for the drier months. Weather delays are common outside the dry window — booking well in advance makes a real difference.

Request quotes from bricklayers in Machans Beach

Describe your job once and compare quotes from bricklayers in Machans Beach.

  • Verified Tradies
  • Personalised Price Estimate
  • Compare Quotes
  • Free For Homeowners