Hire top Bricklayers near Taren Point

Find 31 bricklayers within 15 km of Taren Point. Compare ratings, reviews, and credentials from local professionals.

Every local option

All bricklayers servicing your area.

Instant price estimate

See a scoped range for your job before you talk to anyone.

Compare multiple quotes

Up to 3 local bricklayers quote your job — no obligation.

31+local providers

Get an instant price estimate

What's your job?

Find another job

Roughly how much brickwork needs repointing?

Estimated range

$1,501 – $4,201

$450$15,454

Guide pricing only. Final quotes vary by scope, access, materials, and site conditions.

Free estimate · Quotes from 3+ tradies

4.52

Average rating of bricklayers within 15 km of Taren Point · 203 public reviews

Ranked by distance, ratings and profile completeness.

Browse 31 bricklayers

within 15km · Page 1 of 3

We can help you find the right bricklayer

Describe your job once, we’ll tell you what we think it should cost and then put you in contact with bricklayers until you find the right quote.

  1. 1

    Tell us about your job

    Describe the job once, we'll remember it so you don't have to say it again.

  2. 2

    Get a price estimate

    Know roughly what your job should cost before you speak to a tradie.

  3. 3

    Choose the best bricklayer

    Compare prices and available credentials side by side, with no obligation to proceed.

What to expect when hiring bricklayers in Taren Point

Where bricklayers near Taren Point are based, what the job should cost, what a good quote includes and which licence to check.

Where bricklayers near Taren Point are based

No bricklayers are based in Taren Point, but 28 are within 15 km, the most in Banksmeadow, Botany and Maroubra.

based in Taren Point
0
within 15 km
28

Bricklayers based in each suburb

  • None listed yet
  • Water

The map shows approximately where businesses are based, but tradies will often travel for work. Darker shading means higher availability in an area.

Show suburbs as a list

More bricklayers based here

None listed yet

Around Taren Point: where bricklayers are basedMap of the suburbs within about 15 km of Taren Point where bricklayers are based, from ABS 2021 boundaries, with water shown. Suburbs are shaded from light to dark teal by how many bricklayers are based there; Taren Point is outlined. A list of suburbs grouped by band follows the map.
Suburb boundaries: ABS ASGS Edition 3 (2021), CC BY 4.0

What bricklaying should cost in Taren Point

Bricklaying in Taren Point usually runs $1,501 – $4,201 for repoint brickwork, and $380 – $1,441 for brickwork patch repair.

What you'll pay comes down to the size of the job, the condition of what's being worked on, and the finish you choose. Get a few quotes to see your exact number — it's free.

Things to consider before you book

The local conditions that shape the job, the best time of year to book, and what to sort out before you choose a bricklayer.

C4 Corrosion Zone
Active Reno Area
  • High Corrosion Exposure

    Taren Point has significant salt air corrosion at this distance from the coast. Marine-grade or duplex-coated fixings are strongly recommended — standard galvanised won't hold up long-term on any external metalwork.

  • Seasonal Rainfall

    Taren Point gets moderate rainfall, so timing matters for bricklayer work. Targeting the drier months gives the best run of uninterrupted days.

  • Cooler Months Give Better Results

    Summers in Taren Point are warm enough to affect bricklayer work — materials can dry or cure too quickly on the hottest days. Your tradie will plan their work around the temperature — prep and shade-side work in the heat, application when conditions are right.

  • Premium Finishes

    Properties in Taren Point typically feature higher-end finishes and fittings. Ask your bricklayer about their experience with premium materials — the right techniques and products make a real difference with quality surfaces.

  • High Demand — Book Tradies Further Ahead

    Taren Point has high renovation activity — bricklayer professionals in the area tend to book further in advance. Getting quotes early gives you the best choice of timing and availability.

Best time of year for bricklaying in Taren Point

Ideal months: December to January, April to May and September to October.

IdealWorkableLess suitable

Based on typical local rainfall, temperature and humidity.

What's in a good Bricklaying quote?

A good quote spells out how the job is priced and what's covered — labour, materials, prep and clean-up — so you're comparing like for like. Check what each bricklayer's quote covers before you choose.

Worth knowing: getting two or three quotes is the simplest way to land a fair price — and it costs you nothing.

  • 01
    Brick specs

    Exact brand, type and colour so you compare like with like.

  • 02
    Footings and piers

    Depth, width, concrete grade and pier spacing, all named.

  • 03
    Mortar mix

    Lime or cement and the ratio, important for older homes.

  • 04
    Brickwork scope

    Wall type, dimensions, height and bond pattern.

  • 05
    Scaffolding and clean-up

    Whether scaffold, skip and waste removal are included.

  • 06
    Licence and ABN

    Both on the quote so you can verify them.

Cheapest isn't always the best. Check these before you hire anybody.

  • Recent, genuine reviews

    Read the latest ones, not just the count

  • Experience near you

    Jobs like yours, done locally

  • Credentials for the job

    Licence, insurance and business details

  • A clear written quote

    Itemised, so you can compare like-for-like

Licensed trade

Bricklayer licensing in New South Wales

Bricklayer work is regulated in New South Wales. Requirements vary by state. Here's what to know before hiring.

What to look for

  • Valid state contractor licence or registration displayed on quotes and advertising
  • ABN with active GST registration
  • Public liability insurance ($5M minimum)
  • Housing Industry Association (HIA) or Master Builders Australia membership
  • White Card (construction induction)

Licence details

A Contractor Licence (Bricklaying) / Qualified Supervisor Certificate is required for all bricklayer work. Regulated by Building Commission NSW (formerly NSW Fair Trading). Verify a licence

Frequently asked questions

Hiring bricklayers

What fixings should I use for outdoor work in Taren Point?
At Taren Point's distance from the coast, standard galvanised fixings corrode faster than you'd expect. Marine-grade or duplex-coated fixings are recommended for anything exposed to the elements. Ask your tradie to confirm the material spec in their quote.
When is the best time for bricklayer work in Taren Point?
Taren Point has moderate rainfall spread across the year. bricklayer work is best scheduled during the drier months — check the best months guide above for the ideal window.
Does summer heat affect bricklayer work in Taren Point?
On the hottest days in Taren Point, exterior materials can dry or cure too quickly. Most tradies here plan their day around the temperature — application work early when it's cool, prep and shade-side tasks during the heat. Product choices suited to the conditions also help.
Should I look for a specialist bricklayer in Taren Point?
Properties in Taren Point often have premium finishes that benefit from experienced care. When getting quotes, ask about experience with the specific materials in your home — stone benchtops, engineered timber, wool carpet, or high-end appliances all have particular care requirements.
Should I book bricklayer work early in Taren Point?
Taren Point is one of the more active renovation areas, so bricklayer professionals here can book out further ahead than quieter suburbs. Start getting quotes 2–4 weeks before you want work to begin for the best choice of timing and availability.

Request quotes from bricklayers in Taren Point

Describe your job once and compare quotes from bricklayers in Taren Point.

  • Verified Tradies
  • Personalised Price Estimate
  • Compare Quotes
  • Free For Homeowners