Door Installer Job Guide

Door Installer: New aluminium external door install

Installing an external door can be a simple swap or require new framing, masonry or specialist fitting depending on door type and opening.

Scope-matched providers

Matched providers are filtered for this job type.

Fast estimate flow

Get a scoped range before you post your job.

Compliance documentation

Quote responses can include required compliance notes.

1,181 local providers4.5 avg ratingTypical duration: 6-18 hours

What we'll ask you

4 quick questions for your estimate

Answer these and we’ll generate a personalised range in seconds before you post your job.

Pricing guide

Costs are driven by the door type and the condition of the existing opening. Simple swaps using typical prehung or slab doors and standard hardware are usually less involved than jobs needing frame replacement, masonry or certified/premium door installations. Callout, number of doors and after‑hours attendance also affect the final quote.

  • Door type and certification

    Premium, fire‑rated or multipoint/security doors typically need specialist fitters and more time and materials.

  • Frame and opening condition

    If the existing frame is damaged or the opening needs modification, the job usually requires additional carpentry or masonry and increases scope.

  • Number of doors and scale

    Quoted hours scale with door count, so multiple doors generally increase total labour and time on site.

  • Whether you supply the door

    Standard quotes assume installer‑supplied doors and hardware; homeowner‑supplied doors will usually reduce materials but must be compatible.

  • Callout, timing and access

    A callout fee is normally applied and after‑hours attendance or difficult site access can increase labour or attendance charges.

New aluminium external door install

Estimated range

Request quote

Answer the estimate questions to refine the scope.

What moves this estimate

  • Door type and certification: Premium, fire‑rated or multipoint/security doors typically need specialist fitters and more time and materials.
  • Frame and opening condition: If the existing frame is damaged or the opening needs modification, the job usually requires additional carpentry or masonry and increases scope.
  • Number of doors and scale: Quoted hours scale with door count, so multiple doors generally increase total labour and time on site.
  • Whether you supply the door: Standard quotes assume installer‑supplied doors and hardware; homeowner‑supplied doors will usually reduce materials but must be compatible.

Local results

Active providers

1,181

Average rating

4.5

  • We had an exceptional experience with We Fix Sliding Doors. Brett provided outstanding service for our room’s sliding door, which had previously been worked on by two other profes…

    Shashika Magammanage

  • From start to finish the quality, service and attention to detail was faultless. George understood that our door frame was uneven and needed a precise measure and fitting of a ste…

    Christine Gardner

  • We just had Gareth over to look at a panel on our garage door that was out of alignment as well as give the door a much needed service. From first contact, Gareth was prompt and i…

    Tee Fevaleaki

How it works

  1. 1

    Describe your job

    We ask targeted questions to scope your exact job.

  2. 2

    Get matched

    We match you with local providers for this job type.

  3. 3

    Compare and book

    Review quotes and choose the provider that fits.

Service areas

Frequently asked questions

How long will an external door installation take?
Labour usually scales with the number of doors and job complexity; standard quotes typically include removal of the old door, minor trimming and hardware fitting. If frame replacement, structural work or specialist doors are needed, the work will usually take longer and may involve subcontractors.
Do installers need a licence for door work?
Door installers must hold the required licence and will usually provide any necessary compliance documentation. For certified or specialist doors, fitters may need manufacturer certification and separate permits or structural advice may be required but are not included in standard quotes.
Should I supply the door or the installer?
Standard estimates assume the installer supplies a typical prehung or slab door and standard hardware; supplying your own door will usually reduce the material component of the quote. If you plan to supply the door, confirm the installer will fit it and that the door meets size, rating and hardware compatibility requirements.
What if the frame needs replacing or masonry work?
If frame replacement or opening modification is needed, the job is usually quoted under a frame‑replacement profile that includes extra carpentry, flashing and possible masonry allowances. Such jobs may require subcontractors, longer labour and separate permits or structural reports that are not covered by standard install assumptions.
How accurate is the instant estimate?
Our estimates are built from research across thousands of local jobs and real pricing data. Use them as a guide when speaking to door installers — your actual quote will depend on your specific job.
How many quotes will I get?
We'll match you with up to 3 door installers initially. If you'd like more options, you can request additional matches.
Do I pay anything to get quotes?
No — the service is 100% free for homeowners.
Why do you need photos?
Clear photos cut surprises and price blowouts, saving you money.

Ready to compare quotes?

Start with an instant estimate and then compare local providers for this exact job.

Trusted Tradies
Transparent Quotes
Fast Response Guarantee
100% Australian-Owned